Midea M-Thermal Nature R290 MHC-V10WD2RN7-BE30 monobloc heat pump, 9.50 kW
€5,499.00
Midea MHC-V10WD2RN7-BE30 is a monobloc R290 air to water heat pump with 9.50 kW heating output (A7W35), COP 4.95 and water up to 80 °C.
- Free delivery across Lithuania
- 14-day returns — we pay for the return shipping
- Manufacturer warranty, CE compliant
The Midea M-Thermal Nature R290 MHC-V10WD2RN7-BE30 is the smallest of the four Nature R290 models (V10, V12, V14, V16) and the only one whose heating output does not change: 9.50 kW at A7W35, A7W45 and A7W55, with only the COP moving (4.95, 3.90 and 3.20). It has the lowest sound power level of the four (54 dB(A)) and the highest SCOP, 5.33 at 35 °C, so it suits a site where steady output and efficiency matter more than extra kilowatts. Cooling is 8.10 kW (A35W7) and 10.00 kW (A35W18), the refrigerant is R290 (1.1 kg), heating-circuit water reaches 80 °C and domestic hot water 70 °C.
Technical specifications
| Parameter | Value |
|---|---|
| Model | MHC-V10WD2RN7-BE30 |
| Heating capacity (A7W35) | 9.50 kW |
| COP (A7W35) | 4.95 |
| Heating capacity (A7W45) | 9.50 kW |
| COP (A7W45) | 3.90 |
| Heating capacity (A7W55) | 9.50 kW |
| COP (A7W55) | 3.20 |
| Cooling capacity (A35W7) | 8.10 kW |
| EER (A35W7) | 3.10 |
| Cooling capacity (A35W18) | 10.00 kW |
| EER (A35W18) | 4.60 |
| Efficiency class | A+++ (35 °C) / A+++ (55 °C) |
| SCOP | 5.33 (35 °C) / 4.01 (55 °C) |
| Refrigerant | R290, 1.1 kg |
| Power supply | 380–415 V / 3 / 50 Hz |
| Built-in heating element | 3 kW / 1 stage (separate single-phase 220–240 V supply) |
| Outdoor temperature range (heating) | −25 to 35 °C |
| Water temperature range (heating) | 25–80 °C |
| Domestic hot water temperature | 20–70 °C |
| Sound power level | 54 dB(A) |
| Certification | Quiet Mark |
| Water connections | 5/4" |
| Water flow | 0.40–2.10 m³/h |
| Dimensions (H×W×D) | 1051×1330×475 mm |
| Controls | wired controller, mobile app, Modbus RTU, Smart Grid, cascade of up to 6 units |
| Defrost protection | intelligent defrost, base-pan heating |
How the V10 differs from the V12
The closest model in this range is Midea MHC-V12WD2RN7-BER90. The table shows the parameters on which they genuinely differ.
| Parameter | V10 | V12 |
|---|---|---|
| Heating capacity (A7W35) | 9.50 kW | 12.10 kW |
| Heating capacity (A7W55) | 9.50 kW | 11.90 kW |
| COP (A7W35) | 4.95 | 4.95 |
| Cooling capacity (A35W18) | 10.00 kW | 12.00 kW |
| Sound power level | 54 dB(A) | 55 dB(A) |
| Heating element | 3 kW, 1 stage, separate single-phase 220–240 V supply | 9 kW, 3 stages, same three-phase supply |
Choose the V10 for a steady 9.50 kW that does not drop with 55 °C water, the lowest sound power level (54 dB(A)) and the highest SCOP (5.33 at 35 °C). Its heating element needs a separate single-phase 220–240 V supply. If you need more heat (12.10 kW at A7W35, 11.90 kW at A7W55) or want the heating element on the same three-phase supply, take the V12.
What is the MHC-V10WD2RN7-BE30 monobloc air to water heat pump used for?
The Midea MHC-V10WD2RN7-BE30 handles space heating, cooling and domestic hot water: the heating circuit water temperature is adjustable from 25 to 80 °C and hot water from 20 to 70 °C. The cooling modes A35W7 and A35W18 give 8.10 kW and 10.00 kW respectively. As a monobloc, the whole refrigerant circuit sits in one unit (1051×1330×475 mm), which connects to the system with 5/4" water pipes.
How cold can this Midea heat pump run in winter?
In heating mode the V10 operates at outdoor temperatures down to −25 °C. Ice build-up is limited by intelligent defrost and base-pan heating. The sound power level is 54 dB(A), and the model is Quiet Mark certified.
How much less electricity does it use than direct electric heating?
The seasonal efficiency SCOP is 5.33 at 35 °C and 4.01 at 55 °C. From a SCOP of 5.33, the unit uses roughly 81% less electricity than direct electric heating for the same amount of heat. This is a calculation, not a figure stated by the manufacturer.
Power supply and connections
The main unit runs on a three-phase 380–415 V / 3 / 50 Hz supply. The built-in 3 kW heating element (1 stage) is connected separately, to a single-phase 220–240 V supply.
5/4" water connections, water flow 0.40–2.10 m³/h.
We handle it for you. We select the equipment for your site, deliver anywhere in Lithuania, install and connect it.
Frequently asked questions
What are the heating output and COP of the V10 heat pump?
At A7W35 the Midea MHC-V10WD2RN7-BE30 delivers 9.50 kW with a COP of 4.95. At A7W45 the output is 9.50 kW with a COP of 3.90, and at A7W55 it is 9.50 kW with a COP of 3.20.
Can the MHC-V10WD2RN7-BE30 also cool?
Yes. The Midea MHC-V10WD2RN7-BE30 cools at 8.10 kW in A35W7 mode (EER 3.10) and 10.00 kW in A35W18 mode (EER 4.60).
What outdoor temperature can the V10 heat pump work down to?
In heating mode the Midea MHC-V10WD2RN7-BE30 operates down to −25 °C outdoors. Ice build-up is limited by intelligent defrost and base-pan heating.
What water temperature does the MHC-V10WD2RN7-BE30 reach?
The Midea MHC-V10WD2RN7-BE30 heats water in the heating circuit up to 80 °C, and domestic hot water up to 70 °C.
How noisy is the V10 heat pump?
The sound power level of the Midea MHC-V10WD2RN7-BE30 is 54 dB(A), and the model is Quiet Mark certified.
What power supply does the V10 heat pump need?
The main unit of the Midea MHC-V10WD2RN7-BE30 runs on a three-phase 380–415 V / 3 / 50 Hz supply. The 3 kW heating element is connected separately, to a single-phase 220–240 V supply.
Which refrigerant does the MHC-V10WD2RN7-BE30 use, and is it safe?
The Midea MHC-V10WD2RN7-BE30 uses the natural refrigerant R290 (propane), 1.1 kg in total. Separate flammability safety requirements apply to units like this, so Hybrid Energy agrees the installation location with you in advance.
How much electricity will the V10 heat pump save?
From a SCOP of 5.33 at 35 °C, the Midea MHC-V10WD2RN7-BE30 uses roughly 81% less electricity than direct electric heating for the same amount of heat. At 55 °C the SCOP is 4.01, so the saving is smaller.
How is the MHC-V10WD2RN7-BE30 controlled, and can units be cascaded?
The Midea MHC-V10WD2RN7-BE30 is controlled with a wired controller or a mobile app and supports Modbus RTU and Smart Grid. Up to 6 units can be connected in a cascade.
Does Hybrid Energy deliver and install the V10 heat pump?
Yes. Hybrid Energy selects the Midea MHC-V10WD2RN7-BE30 for your site, delivers anywhere in Lithuania, installs and connects it.
| Dimensions | 105.1 × 133 × 47.5 cm |
|---|
Reviews
There are no reviews yet.