Dragon Hybrid 1000 W Vertical Wind Turbine

Name: Dospel Dragon Hybrid 1000 W vertical wind turbine with PV module
Brand: DOSPEL
SKU: 012 - 9830
Price: 3649.00 EUR
Availability: InStock

The Dospel Dragon Hybrid is a 1000 W vertical axis wind turbine with a built-in 140 W / 54 V photovoltaic module, so one unit produces electricity from both wind and sun. It starts generating at a wind speed of 1.2 m/s, and its noise level at 8 m/s is below 44 dB. It suits off-grid and grid-tied systems.

Technical specifications

Parameter	Value
Generator power	1000 W
Maximum power point	up to 1032 W
Rotor diameter	100 cm
Turbine height	250 cm
Weight	140 kg
Generator	three-phase, with neodymium magnets
Start-up wind speed	from 1.2 m/s
Noise level	< 44 dB at 8 m/s wind (measured at 3 m to PN-EN 61400-11)
Operating temperature	−25 °C to +45 °C
Built-in PV module power / voltage	140 W / 54 V
Controller compatibility	24 V / 48 V
Braking	braking function in the controller
Connection modes	off-grid and grid-tied
Mounting	concrete and metal poles, lattice towers, roof foundations
Protective coating	hot-dip galvanising, 650 μm
Standards	CE, IEC 61400
Warranty	8 years (if the bearings are serviced every 3 years by an authorised installer)

Vertical wind turbine for home: who the Dragon Hybrid suits

Off-grid power systems that generate electricity without the grid
Grid-tied systems
Sites with a low average wind speed, since generation starts from 1.2 m/s
Places where you want to use both wind and sun in a single unit

Is there enough wind at your location?

DOSPEL Dragon turbines start generating from 1.2 m/s, but whether that is enough depends on the site. The Lithuanian Hydrometeorological Service publishes a map of mean annual wind speed based on the 1991–2020 climate normal. Before buying, check your own district on that map rather than relying on a national average.

The Lithuanian Hydrometeorological Service states:

“The highest wind speed recorded in Lithuania’s observation history was 40 m/s.”

Lithuanian Hydrometeorological Service — Wind (translated from Lithuanian)

The turbine can be mounted on concrete and metal poles, lattice towers or roof foundations. When choosing a spot, it matters not only at what wind speed the turbine starts generating but also how firmly the mast is anchored. The turbine weighs 140 kg, is 250 cm tall and has a rotor diameter of 100 cm.

Small wind turbine for 24 V and 48 V systems: what to know about connecting it

The Dragon Hybrid works with 24 V and 48 V controllers, and the braking function sits in the controller. The generator is three-phase with neodymium magnets. Compatibility with Deye systems is not stated in the manufacturer’s data, so we choose the turbine and controller pairing to fit your system.

We handle it for you. We assess the site and mast height, choose the turbine and controller pairing, deliver anywhere in Lithuania, install and connect it. Whether a permit is needed depends on the power, mast height and plot, so together we work out what your case requires.

What to know before you buy

Warranty: 8 years, if the bearings are serviced every 3 years by an authorised installer.
Operating conditions: −25 °C to +45 °C.
Corrosion protection: the manufacturer specifies a 650 μm hot-dip galvanised coating.
Standards: CE and IEC 61400.

Frequently asked questions

At what wind speed does the Dospel Dragon Hybrid start generating?

The Dospel Dragon Hybrid starts generating at a wind speed of 1.2 m/s. That is a low threshold, so the turbine also suits sites with a low average wind speed.

What power does the Dragon Hybrid wind turbine have?

The generator power of the Dospel Dragon Hybrid is 1000 W, and the maximum power point reaches up to 1032 W. The built-in photovoltaic module is rated 140 W at 54 V.

Can the Dragon Hybrid be used off-grid?

Yes, the Dospel Dragon Hybrid is designed for both off-grid and grid-tied systems. Hybrid Energy chooses the connection solution to fit your site.

Which systems is the Dragon Hybrid compatible with?

The Dospel Dragon Hybrid is compatible with 24 V and 48 V controllers. The braking function is in the controller.

Can the Dragon Hybrid be used with a Deye system?

The manufacturer’s data does not state such compatibility: the Dospel Dragon Hybrid works with a controller compatible with 24 V or 48 V systems. Hybrid Energy helps you choose a suitable connection solution.

How loud is the Dospel Dragon Hybrid?

The noise level of the Dospel Dragon Hybrid is below 44 dB at 8 m/s wind, measured at a distance of 3 m to PN-EN 61400-11.

What warranty does the Dragon Hybrid have?

The Dospel Dragon Hybrid has an 8-year warranty, provided the bearings are serviced every 3 years by an authorised installer.

At what temperatures does the Dragon Hybrid work?

The operating temperature of the Dospel Dragon Hybrid is −25 °C to +45 °C.

Do I need a permit for a wind turbine?

It depends on the power, mast height and plot. Before ordering, tell us where you plan to put the Dospel Dragon Hybrid, and Hybrid Energy will work out together with you what your case requires.

How much does the Dragon Hybrid weigh and how big is it?

The Dospel Dragon Hybrid weighs 140 kg, the turbine is 250 cm tall and the rotor diameter is 100 cm. It can be mounted on concrete or metal poles, lattice towers or roof foundations.