Hiconics HEC2-T10.0HR2-EU 10 kW Three-Phase Hybrid Inverter
€1,649.00
Hiconics HEC2-T10.0HR2-EU is a three-phase 10 kW hybrid inverter with 2 MPPT trackers, a 10,000 W EPS output and IP65 protection.
- Free delivery across Lithuania
- 14-day returns — we pay for the return shipping
- Manufacturer warranty, CE compliant
The Hiconics HEC2-T10.0HR2-EU is a three-phase 10 kW hybrid inverter with 2 MPPT trackers, a 10,000 W emergency (EPS) output and IP65 protection. Rated AC output is 10,000 W (11,000 W maximum), maximum efficiency is 97.7%, and the battery voltage range is 180–650 V. It is built to expand the Midea Hiconics All-in-One system and works with Hiconics batteries and a BMS module, solar panels and the grid.
Technical specifications
| Parameter | Value |
|---|---|
| Type | three-phase (3L/N/PE) high-voltage hybrid inverter, part of the all-in-one system |
| Manufacturer / family | Hiconics (Midea group), HEC2 (2nd generation) |
| Rated AC output power | 10,000 W |
| Max. AC output power | 11,000 W |
| Max. apparent power to grid | 11,000 VA |
| Rated AC input power from grid | 10,000 VA |
| Max. AC input power from grid | 11,000 W |
| Max. AC output current | 16.7 A |
| Rated AC output current | 14.5 A (at 230 V) |
| Grid voltage / frequency | 415/240, 400/230, 380/220 V~, 3L/N/PE; 50/60 Hz |
| Displacement power factor | −0.8 … +0.8 |
| THDi | < 3% at rated power |
| Max. PV array power | (5250 + 5250) W / 6000 W (inputs A/B) |
| Max. DC voltage | 1000 V |
| MPPT voltage range | 180–950 V |
| MPPT voltage range at full load | 404–850 V |
| Start-up voltage | 200 V |
| MPPT trackers / strings | 2 MPPT; strings 2 (A) / 1 (B) |
| Max. input current (A/B) | 26 / 16 A |
| Max. short-circuit current (A/B) | 30 / 20 A |
| Battery voltage range | 180–650 V |
| Rated battery charge / discharge current | 30 / 30 A |
| Battery communication | CAN / RS485; reverse-connection protection |
| Emergency (EPS / off-grid) rated power | 10,000 W |
| EPS max. apparent power | 10,000 VA |
| EPS voltage / frequency | 230/400 V, 50/60 Hz |
| EPS max. / rated current | 16.1 A / 14.5 A |
| EPS inrush current | 65 A |
| EPS THDv | < 3% with linear load |
| Switch-over grid → off-grid | < 20 ms |
| Switch-over off-grid → grid | > 60 s per VDE-AR-N 4105 2018-1 |
| Load imbalance | manufacturer states “100% unbalanced load” (Back Up mode) |
| Max. MPPT efficiency | 99.9% |
| Euro efficiency | 96.1% |
| Max. efficiency | 97.7% |
| Battery charge/discharge efficiency | 98.5% (PV–BAT), 97% (BAT–AC) |
| Protection | IP65; protection class I; pollution degree PD3 (outdoor) / PD2 (indoor) |
| Overvoltage category | grid III; PV/battery II |
| Operating temperature | −20 … +55 °C (power reduced from +45 °C) |
| Max. operating altitude | < 3000 m |
| Humidity | 0–95% |
| Storage temperature | −40 … +70 °C |
| Noise (typical) | < 45 dBA |
| Dimensions (W×H×D) | 800 × 525 × 160 mm (±2) |
| Weight | 52 kg (±5) |
| Cooling / topology | “Smart Cooling”; non-isolated |
| Interfaces | Meter/CT, CAN, RS485, WiFi (external, dongle included), DRM; control via APP |
| DC / AC cable cross-section | DC 4–6 mm²; AC 6–10 mm² |
| Recommended grid cable and breaker | 10 mm², 40 A / 4P |
| Recommended load (Back Up) cable and breaker | 4 mm², 25 A / 4P |
| Installation | modular design, quick connectors; installation < 20 min, start-up within 5 min |
| Smart control | TOU (6 time slots, maximum purchase power can be set), VPP Ready, third-party EMS compatibility, seamless grid/off-grid transition |
| Operating modes (via APP) | Self Use, Back Up, Peak Shaving (TOU) |
| In the box | inverter, WiFi dongle, 3 CTs with RJ45 adapter, grid connector, load connector, PV connectors, mounting bracket, user manual |
Download the manufacturer datasheet (PDF)
What is a 10 kW three-phase hybrid inverter for?
The 10 kW three-phase HEC2-T10.0HR2-EU is for a home with solar panels and a battery, where you want to store solar energy and use it in the evening. It manages the flows between panels, battery and grid in one system, and you can monitor it in the APP.
- Homes with a three-phase supply and a solar PV system
- Hybrid inverter with battery: store solar energy by day and use it in the evening
- Backup power when the grid fails: 10,000 W EPS output
- Time-of-use tariffs: TOU scheduling with 6 time slots
How does a hybrid inverter with battery storage work?
A hybrid inverter can keep surplus solar energy in a battery instead of only sending it to the grid. ESO (Lithuanian grid operator) states:
“Part of the surplus electricity generated can be stored in an energy storage device and used in the evening.”
ESO adds that a storage system reduces the power fed into the distribution grid, so in some cases a larger solar PV system can be connected than grid limits alone would allow.
The HEC2-T10.0HR2-EU has three operating modes, which you choose in the APP:
- Self Use. The home loads are supplied first, then the battery is charged, and the rest goes to the grid. When there is not enough sun, the battery supplies power, then the grid.
- Back Up. The battery is kept for grid outages only; it is charged from the panels or from the grid.
- Peak Shaving (TOU). Charge and discharge times and power are set in the APP or on the website.
Which batteries can I connect to the HEC2-T10.0HR2-EU?
The HEC2-T10.0HR2-EU is made to expand the Midea Hiconics All-in-One system and connects only to Hiconics batteries and a BMS module, not to other manufacturers’ batteries. In the Hiconics HEC2-BHPxxr2 battery line the manufacturer lists:
- BHP100r2-EU: 2 modules, 10.2 kWh
- BHP150r2-EU: 3 modules, 15.3 kWh
- BHP200r2-EU: 4 modules, 20.4 kWh
A battery module is 50 Ah, and it communicates with the inverter over CAN or RS485. The battery voltage range at the inverter is 180–650 V.
Backup power during a power cut
When grid voltage disappears, the HEC2-T10.0HR2-EU switches to off-grid mode in under 20 ms and supplies up to 10,000 W (10,000 VA) through the EPS output. EPS voltage is 230/400 V and inrush current is 65 A. How many hours the house will run depends on the battery capacity you choose and the connected load, so work out in advance what you want to power.
Connection and installation
The manufacturer states that the modular design and quick connectors allow installation in under 20 minutes, with start-up taking 5 minutes. On the grid side a 10 mm² cable and a 40 A / 4P breaker are recommended; on the load side a 4 mm² cable and a 25 A / 4P breaker. The inverter weighs 52 kg and measures 800 × 525 × 160 mm. A separate breaker (IEC 60947) is also needed on the grid side, and the box contains 3 CTs, a WiFi dongle and a mounting bracket.
We handle it for you. We select the equipment for your site, deliver anywhere in Lithuania, install and connect it.
What to know before buying
- Batteries: only Hiconics batteries with a BMS module fit.
- Temperature: operating temperature is −20 to +55 °C, and power is reduced from +45 °C.
- Noise: typical noise level is below 45 dBA.
- Switching back: the switch from off-grid back to the grid per VDE-AR-N 4105 takes more than 60 s.
- Meter: one external smart meter is needed; 3 CTs are in the box.
Frequently asked questions
What is the rated power of the Hiconics HEC2-T10.0HR2-EU?
The Hiconics HEC2-T10.0HR2-EU has a rated AC output power of 10,000 W and a maximum of 11,000 W. It is a three-phase hybrid inverter, so it suits a home with a three-phase supply.
Is the HEC2-T10.0HR2-EU a three-phase hybrid inverter with a battery?
Yes. The HEC2-T10.0HR2-EU is a three-phase hybrid inverter that works with Hiconics batteries, solar panels and the grid. The battery voltage range is 180–650 V and the charge and discharge current is 30 A each.
Which batteries work with the HEC2-T10.0HR2-EU?
The HEC2-T10.0HR2-EU is used only with Hiconics batteries and a BMS module, for example BHP100r2-EU (10.2 kWh), BHP150r2-EU (15.3 kWh) or BHP200r2-EU (20.4 kWh). It is not connected to other manufacturers’ batteries.
How much solar panel power can I connect to the HEC2-T10.0HR2-EU?
According to the manufacturer, the maximum PV array power is (5250 + 5250) W / 6000 W (inputs A / B), and the inverter has 2 MPPT trackers. Hybrid Energy helps you choose the panel strings for your roof.
Does the HEC2-T10.0HR2-EU work during a power cut?
Yes. The emergency EPS output delivers 10,000 W, and the switch from grid to off-grid takes under 20 ms. How long the house runs depends on battery capacity and load.
What is the efficiency of the HEC2-T10.0HR2-EU?
Maximum efficiency is 97.7%, Euro efficiency is 96.1% and MPPT efficiency reaches 99.9%. Battery charge and discharge efficiency in the PV–BAT direction is 98.5%.
What operating modes does the HEC2-T10.0HR2-EU have?
It has 3 operating modes: Self Use, Back Up and Peak Shaving (TOU). The TOU schedule allows 6 time slots, and settings are made in the APP.
What cable and breaker does the HEC2-T10.0HR2-EU need?
On the grid side the manufacturer recommends a 10 mm² cable and a 40 A / 4P breaker; on the load (Back Up) side a 4 mm² cable and a 25 A / 4P breaker. An electrician makes the final choice for your site.
Can the HEC2-T10.0HR2-EU be installed outdoors?
Yes. Its protection class is IP65 and the operating temperature is −20 to +55 °C. Power starts to drop from +45 °C.
Does Hybrid Energy install and connect the HEC2-T10.0HR2-EU?
Yes. Hybrid Energy selects the equipment for your site, delivers anywhere in Lithuania, installs and connects it.
Sources
| Brand | Hiconics |
|---|
Reviews
There are no reviews yet.